#General Notes # #Scribus pages are arranged in a vast scratch space, where 1 unit == 1/72 inch. #Positive x is to the right, and positive y is downward. #The positions, width and height in the elements are in scratch space coordinates #with the exception of POCOOR and COCOOR coordinates, which are in the rotated #and translated space of a PAGEOBJECT. # #Things that are in blue are optional. # #Things that are in red and blinking are self explanatory. # ##IF YOU EDIT THIS FILE, please remember that everything must have proper whitespace ##indentation, like with Python. Each element's attributes must be indented greater ##than the element. All of an element's sub elements must be indented under a label ##called "elements:", which should be after any attributes. SCRIBUSUTF8NEW #Wraps up the whole enchilada Version # "1.4" elements: DOCUMENT AUTOL #Automatic line spacing percentage, where 100==100% AutoSave #1 if autosave on, else 0 AutoSaveTime #Time between autosaves, in milliseconds! BACKG BaseC BRUSH BRUSHSHADE ABSTSPALTEN #Distance between Columns in automatic Textframes ALAYER #(optional) Active Layer ANZPAGES #Number of Pages AUTHOR #Author of the Doc AUTOCHECK #(optional) Automatic Hyphenation during typing 0 = off, 1 = on AUTOMATIC #(optional) Automatic Hyphenation 0 = off, 1 = on AUTOSPALTEN #Number of Columns in automatic Textframes AUTOTEXT #1 if you want to use automatic textframes, or 0 BASEGRID #(optional) Width of the Baseline Grid BASEO #(optional) Startoffset for the Baseline Grid BleedTop #Default of how much to bleed off the top BleedBottom #Default of how much to bleed off the bottom BleedLeft #Default of how much to bleed off the left BleedRight #Default of how much to bleed off the right BOOK #(optional) Which PageSet to use BORDERBOTTOM #Default bottom margin of a page BORDERLEFT #Default left margin of a page BORDERRIGHT #Default right margin of a page BORDERTOP #Default top margin of a page COMMENTS #Comments for the Doc CPICT currentProfile DCOL #(optional) Number of Columns in Textframes DFONT #Default Font DGAP #(optional) Default Gap between Columns in Textframes DIMo #(optional) Default Rendering Intent for the Monitor #0 = Perceptual #1 = Relative Colorimetric #2 = Saturation #3 = Absolute Colorimetric DIMo2 #(optional) Default Rendering Intent for Images #0 = Perceptual #1 = Relative Colorimetric #2 = Saturation #3 = Absolute Colorimetric DIPr #(optional) Default Rendering Intent for the Printer #0 = Perceptual #1 = Relative Colorimetric #2 = Saturation #3 = Absolute Colorimetric DOCCONTRIB #(optional) Person or organization making contributions to the document DOCCOVER #(optional) Extent of scope of the document DOCDATE #(optional) Date related to life-cycle of the document, YYYY-MM-DD DOCFORMAT #(optional) Physical or digital manifestation of the document DOCIDENT #(optional) An unambigious reference to the document, eg ISBN DOCLANGINFO #(optional) Language of content of document DOCRELATION #(optional) Reference to a related document DOCRIGHTS #(optional) Information about rights held in and over the document, eg copyright DOCSOURCE #(optional) Reference to a document from which this document is derived DOCTYPE #(optional) Nature or genre of the content of the document Dpbla #(optional) Use Blackpoint Compensation 0 = off, 1 = on Dpgam #(optional) Mark Colors out of Gamut 0 = off, 1 = on DPIn #(optional) Default ICC-Profile for solid Colors DPIn2 #(optional) Default ICC-Profile for Images DPMo #(optional) Default ICC-Profile for the Monitor DPPr #(optional) Default ICC-Profile for the Printer DPSo #(optional) Simulate the Printer on Screen 0 = off, 1 = on Dpuse #(optional) Use Colormanagement 0 = off, 1 = on DSIZE #Default Fontsize FIRSTLEFT #(optional) First page is a left page when this attribute is present FIRSTNUM #(optional) First page number in the Doc DPInCMYK EmbeddedPath EndArrow GROUPC #(optional) Counter for Groups in the Doc GUIDELOCK #(optional) Guides locked 0 = off, 1 = on GRAB GuideC GUIDELOCK GuideRad GuideZ HCMS #(optional) Colormanagement available 0 = off, 1 = on HYCOUNT #(optional) Number of Hyphens allowed following each other KEYWORDS #Keywords for the Doc LANGUAGE #(optional) Language of the Doc MAJGRID #(optional) Distance of the major Gridlines MINGRID #(optional) Distance of the minor Gridlines MINWORDLEN #(optional) Minimum length of a Word to be hyphenated ORIENTATION #(optional) Orientation of the Doc 0 = Portrait 1 = Landscape PAGEHEIGHT #Height of the Doc PAGEWITH #Width of the Doc PUBLISHER #(optional) Person or organization responsible for making the document available HalfRes LINESHADE MAGMAX MAGMIN MAGSTEP MAJORC MARGC MINORC PAGEC PAGESIZE #Default page name, such as "A4" or "Letter" PASPECT PEN PENLINE PENSHADE PENTEXT PICTSCX PICTSCY PICTSHADE POLYC POLYF POLYFD POLYR POLYS PSCALE RANDF rulerMode rulerXoffset rulerYoffset ScratchBottom #Space at the bottom of the scratch space, after the last page ScratchLeft #Space at the left of the scratch space ScratchRight #Space at the right of the scratch space ScratchTop #Space at the top of the scratch space, before the pages SHOWBASE #1 to show the baseline grid showcolborders #1 to show color borders SHOWControl SHOWFRAME SHOWGRID #1 to show ordinary grid SHOWGUIDES #1 to show guides SHOWLINK #1 to show links SHOWMARGIN #1 to show margins SHOWPICT #1 to show images showrulers #1 to show rulers SnapToGrid #1 to snap to grid when editing SnapToGuides #1 to snap to guides when editing StartArrow STIL STILLINE StrikeThruPos StrikeThruWidth StrokeText TabFill TabWidth #Default width for tabs in text frames TextBackGround TextBackGroundShade TextLineColor TextLineShade TextPenShade TextStrokeShade TITLE #Title of the Doc UNITS #(optional) Measurement unit for the Doc 0 = Points 1 = Millimeters 2 = Inches 3 = Picas VHOCH #Percentage for Superscript VHOCHSC #Percentage for scaling of the Glyphs in Superscript VKAPIT #Percentage for scaling of the Glyphs in Small Caps VTIEF #Percentage for Subscript VTIEFSC #Percentage for scaling of the Glyphs in Subscript UnderlinePos UnderlineWidth WIDTH WIDTHLINE elements: CheckProfile #(one or more) Name #Name of the profile ignoreErrors #Whether to ignore errors ignoreOffErrors autoCheck #Whether automatically check as you go, not just at specific times checkTransparency #Whether to check for use of transparency checkResolution #Whether to check for resolution minResolution #Minimum resolution maxResolution #Maximum resolution checkOverflow #whether to check for text overflowing its frames checkRasterPDF checkForGIF #Check for any GIF images checkGlyphs checkAnnotations checkPictures checkOrphans COLOR #(zero or more) NAME #Name of the Colour CMYK #Value as hexadecimal String, such as "#22bb77ee" RGB #Value as hexadecimal String, such as "#11aa55" Register #1 if color is registration color, or 0 Spot #1 if color is a spot color, or 0 Gradient #A gradient name #Name of the gradient elements: CSTOP NAME #Name of the stop colour RAMP #Position of the colour stop, range from 0.0 till 1.0 SHADE #Shading of the stop colour in Percent TRANS #Transparency of the colour stop, range from 0.0 till 1.0 STYLE #A paragraph style NAME #Name of the style PARENT #Parent style name DefaultStyle #Whether this is the default style ALIGN LINESPMode LINESP INDENT #Left indent RMARGIN #Right margin FIRST #First indent VOR #Gap before NACH #Gap after DROP #Has drop cap DROPLIN #Number of lines for a drop cap DROPDIST #Drop cap offset OpticalMargins #Whether to use optical margins HyphenationMode MinWordTrack MinGlyphShrink MaxGlyphExtend PSHORTCUT #Key shortcut for this style elements: Tab Fill Pos Type #0 = Left #1 = Right #2 = Full Stop #3 = Comma #4 = Center CHARSTYLE #A character style CNAME #Name of the style CPARENT #Parent style name FONT #Font name FONTSIZE #Font size FEATURES FCOLOR #Fill color FSHADE #Fill shade SCOLOR #Stroke color SSHADE #Stroke shade TXTSHX #Text shadow offset horizontally TXTSHY #Text shadow offset vertically TXTOUT #Outline width TXTULP #Underline offset TXTULW #Underline width TXTSTP #Strikethrough offset TXTSTW #Strikethrough width SCALEH #Scaling horizontally SCALEV #Scaling vertically BASEO #Offset from baseline KERN wordTrack SHORTCUT #Shortcut for this style HYPHEN #Hyphenator lists EXCEPTION #Special words WORD HYPHENATED IGNORE JAVA #Javascripts NAME #Name of a script SCRIPT LAYERS NUMMER #Number of the layer NAME #Name of the layer EDIT #Whether the layer is editable DRUCKEN #Flag for printing 0 = Layer is not printed 1 = Layer is printed LEVEL #Level of the Layer 0 = Background SICHTBAR #Flag for visibility 0 = Layer is not visible 1 = Layer is visible FLOW TRANS BLEND OUTL LAYERC MultiLine Printer #Printer options firstUse toFile #Print to file useAltPrintCommand outputSeparations useSpotColors #Whether to use spot colors useColor mirrorH #Mirror printing horizontally mirrorV #Mirror printing vertically useICC #Use ICC color profiles doGCR #Whether to have grey component replacement doClip setDevParam useDocBleeds #Use document bleeds cropMarks bleedMarks registrationMarks colorMarks includePDFMarks PSLevel #The postscript level PDLanguage #Which printer description language markOffset BleedTop BleedBottom BleedLeft BleedRight printer filename separationName printerCommand elements: Separation Name #Name of the separation PDF #pdf export settings Clip displayBookmarks displayFullscreen displayLayers displayThumbs doMultiFile Articles #Flag, set to 1 when use PDF-Articles is checked in the PDF-Options Dialog BBottom #(optional) Bottom Distance for the Bleed Box Binding #Binding for the PDF-Document 0 = Left Binding 1 = Right Binding BLeft #(optional) Left Distance for the Bleed Box Bookmarks #Flag, set to 1 when include Bookmarks is checked in the PDF-Options Dialog BRight #(optional) Right Distance for the Bleed Box BTop #(optional) Top Distance for the Bleed Box CMethod #(optional) Compression Method for Pictures #0 = Automatic, Scribus tries to use the best Method #1 = JPEG Compression #2 = Flate Compression #3 = No Compression Compress #Flag, set to 1 when use Compress Text is checked in the PDF-Options Dialog Encrypt #(optional) Flag, set to 1 when use Encryption is checked in the PDF-Options Dialog fitWindow Grayscale hideMenuBar hideToolBar ImageP ImagePr InfoString Intent Intent2 PassOwner #(optional) Owner Password for encrypted PDF's PassUser #(optional) User Password for encrypted PDF's Permissions #(optional) Value used for Encryption Settings PicRes #Resolution for downsampling Images PresentMode #Flag, set to 1 when Presentation effects should be used PrintP #(optional) ICC-Profile for the Printer, only used for PDF-X/3 output Quality #(optional) Quality setting for Image Compression #0 = Maximum (95%) #1 = High (85%) #2 = Medium (75%) #3 = Low (50%) #4 = Minimum (25%) RecalcPic #Flag, set to 1 when Downsample Images is checked in the PDF-Options Dialog Resolution #Resolution for embedded EPS-Pictures or PDF's RGBMode #(optional) Flag, set to 1 when Output should be in RGB SolidP #(optional) ICC-Profile for solid colours Thumbnails #Flag, set to 1 when Generate Thumbnails is checked in the PDF-Options Dialog UseLpi #(optional) Flag, set to 1 when the informations in the LPI tags should be used for Linescreening UseProfiles #(optional) Flag, set to 1 when ICC-Profiles should be used for solid colours UseProfiles2 #(optional) Flag, set to 1 when ICC-Profiles should be used for images Version #PDF-Version which should be generated 12 = PDF-X/3 13 = PDF-1.3 14 = PDF-1.4 MirrorH MirrorV openAction PageLayout RotateDeg UseLayers UseSpotColors elements: LPI #(optional) Angle #Linescreening angle Color #Name of the Colour for which these settings are ment Frequency #How many lines per Inch are used SpotFunction #Code for the used Spotfunction: 0 = Simple Dot 1 = Line 2 = Round 3 = Ellipse Effekte #PDF display effects pageEffectDuration pageViewDuration effectType Dm M Di DocItemAttributes elements: ItemAttribute TablesOfContents Name #Name of the contents ItemAttributeName FrameName ListNonPrinting Style #Text style to use NumberPlacement Sections #description of how to number groups of pages elements: Section Name #Any string will do Active #1 for show, 0 for not show Number #Seems to be a generic index number, redundant? Type #can be: Type_A_B_C, Type_a_b_c, Type_1_2_3, Type_I_II_III, Type_i_ii_iii, Type_None (same appearance as Active==0) From #Starting page index To #Ending page index Start #1st page number for range Reversed #If the number range should count in opposite direction PageSets #(zero or more) elements: Set Columns GapBelow Rows FirstPage GapHorizontal Name GapVertical elements: PageNames #there are Rows*Columns of these Name #Name of this page type, eg "Left Page" or "Right Page" Pattern #a pattern definition Name #Name of the pattern width #Width height #Height scaleX #additional scaling horizontally scaleY #additional scaling vertically xoffset #Offset horizontally yoffset #Offset vertically MASTERPAGE #Has the same options as PAGE elements (?) PAGE Size #Name of paper size NUM #Page number, 0 is the first page BORDERTOP #Top margin BORDERBOTTOM #Bottom margin BORDERLEFT #Left margin BORDERRIGHT #Right margin NAM #Page name, blank if not a master page MNAM #Name of attached master page LEFT #For multipage spreads, which page in the spread is the left most Orientation #1 for landscape, 0 for portrait PAGEHEIGHT #Height in postscript points (72==1 inch) PAGEWIDTH #Width in postscript points (72==1 inch) PAGEXPOS #X coordinate of upper right corner of page in scratch space PAGEYPOS #Y coordinate of upper right corner of page in scratch space NumHGuides #Number of horizontal guides listed in HorizontalGuides HorizontalGuides #List of positions of horizontal guides, relative to page origin NumVGuides #Number of vertical guides listed in VerticalGuides VerticalGuides #List of positions of vertical guides, relative to page origin AGHorizontalAutoGap AGVerticalAutoGap AGHorizontalAutoCount AGVerticalAutoCount AGHorizontalAutoRefer AGVerticalAutoRefer AGSelection MASTEROBJECT #Same as a PAGEOBJECT, but is on a MASTERPAGE PAGEOBJECT #An object that is somehow drawable on a PAGE ALIGN #(optional) Alignment for text when no paragraph style is set #0 = No Style, left aligned #1 = Align Text Center #2 = Align Text Right #3 = Align Text Justified #4 = Align Text Forced Justified ANNAME #(optional) Field name of the Annotation, also used for the object name ANNOTATION #(optional) Set to 1 if the object is a Annotation or a PDF-Field ANAA #(optional) Set to 1 if Annotations Action is a JavaScript Action ANACTION #(optional) Action for the PDF-Field, contains either a URL or a JavaScript ANACTYP #(optional) Type of the Action for a PDF-Field #0 = None #1 = Java Script #2 = Go To #3 = Submit Form #4 = Reset Form #5 = Import Data ANBCOL #(optional) Name of the border colour of the PDF-Button ANBLACT #(optional) JavaScript executed when the PDF-Field looses focus ANBSTY #(optional) Borderstyle for a PDF-Button #0 = Solid #1 = Dashed #2 = Underline #3 = Beveled #4 = Inset ANBWID #(optional) Borderwidth of a PDF-Button #0 = None #1 = Thin #2 = Normal #3 = Wide ANCACT #(optional) JavaScript executed when the PDF-Page is changed ANCHK #(optional) Set to 1 if the PDF-Checkbox is checked by default ANCHKS #(optional) Style of the checkmark in a PDF-Checkbox #0 = Check #1 = Cross #2 = Diamond #3 = Circle #4 = Star #5 = Square ANDACT #(optional) JavaScript executed when the mouse button is pressed ANDOWN #(optional) Text for Button Down of a PDF-Button ANEACT #(optional) JavaScript executed when the cursor enters the PDF-Field ANEXTERN #(optional) Path or URL for an external PDF-Link ANFACT #(optional) JavaScript executed before formatting the PFD-Field ANFEED #(optional) Feedback for PDF-Button press #0 = None #1 = Invert #2 = Outlined #3 = Push animation ANFLAG #(optional) Flags for Annotations, value is the bitwise or of the following constants #1 = Field is read-only #2 = Field must have a value #4 = Value is not exported #4096 = Field is a multiline Textfield #8192 = Field is a password field #262144 = Field is editable #4194304 = Don't spell check #8388608 = Do not scroll ANFOACT #(optional) JavaScript executed when the field receives focus ANFONT #(optional) Font for the PDF-Button or Annotation #0 = Courier #1 = Courier Bold #2 = Courier Italic #3 = Courier Bold Italic #4 = Helvetica #5 = Helvetica Bold #6 = Helvetica Italic #7 = Helvetica Bold Italic #8 = Times #9 = Times Bold #10 = Times Italic #11 = Times Bold Italic #12 = Zapf Dingbats #13 = Symbols ANFORMAT #(optional) Format of the Value in a PDF-Field #0 = Plain text #1 = Number #2 = Percentage #3 = Date #4 = Time #5 = Custom format ANHTML #(optional) Set to 1 if the PDF-Submit Action should send HTML instead of FDF ANICON #(optional) Set to 1 if the PDF-Button uses icons ANKACT #(optional) JavaScript for keypresses ANMC #(optional) Maximum number of characters in a PDF-Textfield ANPLACE #(optional) How to display the Icon of a PDF-Button #0 = Caption only #1 = Icon only #2 = Caption below Icon #3 = Caption above Icon #4 = Caption right to Icon #5 = Caption left to Icon #6 = Caption overlays Icon ANROLL #(optional) Text for roll over of PDF-Buttons ANSCALE #(optional) Scaling of Icons on PDF-Buttons #0 = Always #1 = When Icon is too small #2 = When Icon is too big #3 = Never ANTOOLTIP #(optional) Tooltip for the PDF-Field ANTYPE #(optional) Type of the Annotation or PDF-Field #0 = Text annotation #1 = Link annotation #2 = PDF-Button #3 = PDF-Textfield #4 = PDF-Checkbox #5 = PDF-Combobox #6 = PDF-Listbox #7 = External Link #8 = External Weblink ANVACT #(optional) JavaScript to be performed when the fields value has changed ANVIS #(optional) The visiblity of the PDF-Field #0 = visible #1 = hidden #2 = don't print #3 = don't show, but print ANXACT #(optional) JavaScript when the mouse pointer leaves the field ANZIEL #(optional) Page number of a PDF-Link AUTOTEXT #Set to 1 if object is an automatic textframe BASEOF #(optional) Offset for the text from its path for text on a path BEXTRA #(optional) Distance of text from the bottom edge of the frame BOOKMARK #Set to 1 if object is a PDF-Bookmark BookNr #(optional) Number of the Bookmark BottomLine #Set to 1 if the table item has a bottom line BottomLINK #Number of the object that is below of this object in tables CLIPEDIT #(optional) Set to 1 if the shape was edited COLGAP #Gap between text columns COLUMNS #Number of columns in text COCOOR #(optional) #Coordinates of the object shape, a list of groups of four points, ordered #vertex point - previous bezier control point - vertex point - next bezier control point. #However, the list starts with a vertex point - next control, so after those 2 points, the #the next 4 relate to the second vertex. DASHOFF #(optional) Offset for the first dash, in points DASHS #List of repeating on-off dash lengths in points doOverprint #0 for no, 1 for yes to enable overprint detection for this object endArrowIndex #0 is none, or nonzero index to list of various types of arrows. As of 1.4 there are 36 kinds. fillRule #0 for Non zero winding rule, 1 for Even-Odd winding rule EMBEDDED #(optional) Set to 1 if embedded ICC-Profiles should be used EPROF #(optional) Embedded ICC-Profile for images EXTRA #Distance of text from the left edge of the frame EXTRAV #(optional) Kerning value FLIPPEDH #Set to an uneven number if object is flipped horizontal FLIPPEDV #Set to an uneven number if object is flipped vertical FRTYPE #(optional) Type of the shape of an object #0 = Rectangle #1 = Ellipse #2 = Rounded rectangle #3 = Free shape GROUPS #List of group identifiers gHeight gWidth gXpos gYpos GRTYP #(optional) Type of the gradient fill #0 = No gradient fill #1 = Horizontal gradient #2 = Vertical gradient #3 = Diagonal gradient #4 = Cross diagonal gradient #5 = Radial gradient #6 = Free linear gradient #7 = Free radial gradient ImageClip ImageRes isInline #0 for is normal object, 1 for is in a text stream HEIGHT #Height of the object IFONT #Name of the font for text INVERS #(optional) Image is inversed IRENDER #(optional) Rendering Intent for Images #0 = Perceptual #1 = Relative Colorimetric #2 = Saturation #3 = Absolute Colorimetric ISIZE #(optional) Fontsize for text isTableItem #(optional) Set to 1 if the object belongs to a table LINESPMode LANGUAGE #(optional) Language of the object LAYER #(optional) Layer number the object belongs to LeftLine #(optional) Set to 1 if the table item has a left line LeftLINK #(optional) Number of the object that is left to this object in tables LINESP #Linespacing for text LOCALSCX #Scaling of the image in the X-Direction LOCALSCY #Scaling of the image in the Y-Direction LOCALX #X-Position of the image in the image frame LOCALY #Y-Position of the image in the image frame LOCK #(optional) Set ot 1 if the object is locked LOCKR #(optional) Set to 1 if the object is protected against resizing NAMEDLST #(optional) Name of the custom line style BACKITEM #Index number of the previous PAGEOBJECT of linked textframe BACKPAGE #Number of the page of the previous frame in linked textframes NEXTITEM #Index number of the next PAGEOBJECT for linked textframes NEXTPAGE #Number of the page of the next frame in linked textframes NUMCO #(optional) Number of coordinates in COCOOR, so twice the number of numbers in COCOOR NUMDASH #Number of entries in DASH NUMGROUP #Number of grops in GROUPS NUMPO #Number of coordinates in POCOOR, so twice the number of numbers in POCOOR OwnLINK #(optional) Number of this object in tables OnMasterPage #The name of the MasterPage this object is on. For MASTEROBJECTs. OwnPage #The number of the document page this object is on. PCOLOR #Name of the colour for fll PCOLOR2 #Name of the colour for stroke PFILE #Filename of the image, saved as relative file PFILE2 #(optional) Filename of the pressed icon image for PDF-Buttons PFILE3 #(optional) Filename of the rollover icon image for PDF-Buttons PICART #Set to 1 if image should be shown PLINEART #How the line is dashed. Including these 5, there are various others up to 37 (as of 1.4), which is custom, and which # triggers the use of DASHES, DASHOFF, and NUMDASH. #1 = Solid Line #2 = Dashed Line #3 = Dotted Line #4 = Dash Dot Line #5 = Dash Dot Dot Line PLINEEND #(optional) Code for the line end rendering #0 = FlatCap #16 = SquareCap #32 = RoundCap PLINEJOIN #(optional) Code for the line join rendering 0 = MiterJoin 64 = BevelJoin 128 = RoundJoin pattern #which pattern to use PLTSHOW #(optional) Set to 1 if the path of a Text on a path should be shown POCOOR #Coordinates of the object shape, a list of groups of four points, ordered #vertex point - previous bezier control point - vertex point - next bezier control point. #However, the list starts with a vertex point - next control, so after those 2 points, the #the next 4 relate to the second vertex. PRFILE #(optional) ICC-Profile for the image PRINTABLE #Set to 1 if the object should be printed, 0 otherwise PTYPE #Type of object 2 = Image 4 = Text 5 = Line 6 = Polygon 7 = Polyline 8 = Text on a path PWIDTH #Line width of the object RADRECT #(optional) Corner radius for rounded Rectangles RATIO #(optional) Set to 1 if the image scaling should respect the aspect ratio REVERS #(optional) Text is rendered reverse, eg Arabic REXTRA #(optional) Distance of text from the right edge of the frame RightLine #(optional) Set to 1 if the table item has a right line RightLINK #(optional) Number of the object that is to the right of this object in tables ROT #Rotation of the object in degrees SCALETYPE #(optional) How the image can be scaled 0 = Free scaling 1 = Scaling bound to image frame dimensions SHADE #Shading for fill SHADE2 #Shading for stroke TEXTFLOW #Set to 1 if text flows around this object TEXTFLOW2 #Set to 1 if text flows around the bounding box of this object TEXTFLOW3 #Set to 1 if text flows around the contour line of this object TEXTFLOWMODE #0 = Do not cause any text wrapping #1 = Use frame shape as text wrap border #2 = Use bounding box #3 = Use contour line #4 = Use image clip path (if available) TEXTRA #(optional) Distance of text from the top edge of the frame TopLine #(optional) Set to 1 if the table item has a top line TopLINK #(optional) Number of the object that is above this object in tables TransValue #(optional) Transparency value for fill, in range [0..100] TransValueS #(optional) Transparency value for stroke, in range [0..100] TXTFILL #(optional) Name of the default text fill colour TXTFILLSH #(optional) Default shading for the text fill colour TXTSCALE #(optional) Default text scaling TXTSTROKE #(optional) Name of the default colour for stroking text TXTSTRSH #(optional) Default shading for stroking text TXTSTYLE #(optional) Default character style, value is the bitwise or of these constants: #1 = Superscript #2 = Subscript #4 = Outlined #8 = Underlined #16 = Strikeout #64 = Small Caps WIDTH #Width of the Object XPOS #X-Positon of the Object YPOS #Y-Position of the Object startArrowIndex #0 is none, or nonzero index to list of various types of arrows. As of 1.4 there are 36 kinds. TXTBASE TXTKERN TXTSCALEV elements: PageItemAttributes Tab Fill Pos Type #0 = Left #1 = Right #2 = Full Stop #3 = Comma #4 = Center CSTOP #(optional) A color stop of a gradient NAME #Name of the stop colour RAMP #Position of the colour stop, range from 0.0 till 1.0 SHADE #Shading of the stop colour in Percent TRANS #Transparency of the colour stop, range from 0.0 till 1.0 ITEXT #Chunk of text CAB #Paragraph style for the character #0 = No Style, left aligned #1 = Align Text Center #2 = Align Text Right #3 = Align Text Justified #4 = Align Text Forced Justified higher values indicate a custom paragraph style CCOLOR #Name of the fill colour CEXTRA #Value for Kerning CFONT #Name of the Font CH #The character(s) itself CSCALE #(optional) Scaling in percent CSHADE #Shading of the fill colour CSHADE2 #(optional) Shading of the stroke colour CSIZE #Fontsize in points CSTROKE #(optional) Name of the stroke colour CSTYLE #The style of the character, value is the bitwise or of these constants: #1 = Superscript #2 = Subscript #4 = Outlined #8 = Underlined #16 = Strikeout #64 = Small Caps #128 = Word can be hyphenated here CBASE CSTW CULP CKERN COUT CSCALEV CSTP CULW CSHX CSHY var #Variable text chunk name #can be "pgno" for page number, or "pgco" for total page count